Loading ...
Loading ...
Loading ...
SPECIFICATIONS
NOTE: ALWAYS have equipment measured by Contractor before beginning
any project.
*These dimensions create the required air gap underneath this appliance. This air gap serves multiple purposes, such
as preventing a build-up of heat in the island cavity and helping provide proper airflow for combustion
and/or cabinetry.
Blaze Outdoor Products Instructional
Book Page | 5
Product Inspection: A final inspection of your product occurs at the factory to ensure a quality product is
packaged. Please re-check for possible shipping damage immediately after unpacking your oven. If the
appliance is found to have some damage, contact your dealer immediately as often the shipping carrier will
have a timeframe to report damage. Please also save the packaging material the product came with as that is
at times inspected by the shipping carrier.
Caution: Do not leave the unit under the sun with the protective film on for a long period of time as it will make
the film difficult to remove and/or leave markings on the materials which are not covered by the warranty.
Your Blaze Series Appliance comes pre-assembled and requires very little setup. We do however; recommend
the use of professional help during the installation of your unit as improper installation may affect your
warranty. Remove the unit from the box along with all accessories and check that no damage has occurred to
the unit or any parts. Remove all packaging materials, labels and protective plastic film before you start
cooking.
Burners: Check the burner tubes and remove any obstructions that may be in the ports or holes. Using cold
water and a brush will be sufficient. Make sure all foreign particles are removed from the burner before use.
Make sure the air shutter on the burners is slightly opened (to about 1/8" for NG and 1/4" for LP). When
finished ensure that the burners are aligned with the valve orifice and seated in the bracket slot. This is
accomplished by first placing the burner tube shutter hole securely over the valve orifice and ensuring the
male post on the burner rests in the corresponding slot in the rear of the oven chassis.
II. Unpacking Unit
26.20
23.22
10.36
14.83
Loading ...
Loading ...
Loading ...