Loading ...
Loading ...
Loading ...
NOTE: This oven uses a “Transformer” to provide power to the LED lights and internal lights. This
diagram shows the connection to the transformer.
•
All gas connections should be made by a Professional qualified
technician and in accordance with local codes and ordinances. The
installation must conform with local codes or, in the absence of local
codes, with either the national Fuel Gas Code, ANSI Z223.1/NFPA 54,
or CAN/CGA-B149.1, Natural Gas Installation Code or CAN/CGA-
B149.2, Propane Installation Code.
•
Always check the Rating Plate to make sure the gas supply you are
hooking up to is the gas type the appliance is manufactured for.
•
Check the rating label on the left hand outside of the unit.
Blaze Outdoor Products Instructional
Book Page | 13
15 AMP
OUTLLET
BLAZE
APPLIANCE
CORD
Keep any electrical supply cord and fuel supply hose away from any heated surfaces, sharp edges and
dripping grease.
Be certain your appliance is properly installed and grounded by a qualified technician in accordance with
applicable codes. To guarantee the electrical safety of this appliance, continuity must exist between the
appliance and an effective grounding system. It is imperative that this basic safety requirement be met.
The manufacturer cannot be held responsible for damages caused by the lack or inadequacy of an
effective grounding system.
Do not operate any appliance with a damaged power cord or power plug, and do not operate any
appliance after the appliance malfunctions or has been damaged in any manner. If this should occur,
return the appliance to the nearest authorized service facility for examination, repair or adjustment.
This appliance conforms to all uniform electrical safety codes and electrical
grounding regulations. Install unit according to I.A.W. local codes or with National
Electrical Code ANSI/NFPA 70 or CSA C22.1 in their absence.
RATING PLATE LOCATION
V. Gas Safety and Installation Warnings
Loading ...
Loading ...
Loading ...