Loading ...
Loading ...
Loading ...
•
Do not twist the gas supply hose.
•
Before each use, visually inspect the gas supply hose for cracks,
cut
s
or excessive wear. Replace the
hose
if necessary.
Check for gas leaks before each use.
•
Gas
S
pecifications: Be sure that the gas supplied to the appliance conforms to the model you
purchased. A Natural Gas appliance requires natural gas to operate; an LP appliance requires liquid
propane gas to operate.
•
Never connect the appliance to an unregulated gas supply line. Appliances operated without a
regulator are unsafe and will not be serviced until installed properly and safely. Unsafe operation
without a gas regulator will void the warranty of the appliance.
•
Appliances operated with NG (natural gas) gas must be installed with the NG regulator supplied with
the unit and set to 4.0" water column pressure.
•
Appliances operated with LP (liquid propane) gas must be installed with an LP regulator set to 11"
water column pressure.
•
Please contact your dealer and use a licensed contractor or installer to convert your appliance to the
different gas type.
Blaze Outdoor Products Instructional
Book Page | 14
CHECK TO ENSURE THAT THE GAS SUPPLY HOSE DOES NOT COME IN CONTACT WITH ANY HOT SURFACE,
SHARP OR ROUGH EDGES OF THE OVEN OR OUTDOOR KITCHEN CONSTRUCTION. DO NOT KINK THE GAS
LINE WHEN INSTALLING.
The self-contained LP system appliance is design certified to be used with a standard 20 lb., 12 1/4" diameter;
18" high cylinder with right-handed connection threads and this is the maximum size LP tank to be used. The
cylinder must be marked in accordance with the latest U.S. Department of Transportation specifications for
LP gas cylinders. (DOT. CFR49 or National Standards of Canada CAN/CSA-B359 Cylinders, Spheres and
Tubes for the Transportation of Dangerous Goods) a Propane Tank with an ODP) Overfill Prevention Device)
must be used at all times.
IMPORTANT: Never connect
ovens, ovens or any
appliance to an unregulated gas
supply.
If there are local codes that apply to outdoor ovens and ovens, you will have to confirm them with the local
authority.
Installation must conform with local codes or in the absence of local codes, to the National Fuel Gas Code,
ANSI Z223.1/NFPA 54 and Natural Gas Installation Code, CSA B149.1. All Natural Gas installations must
conform to local codes or in the absence of local codes the national fuel gas code, ANSIZ2223.1a-‐1998.
If there are local codes that apply to outdoor burners, you will have to conform to them. Installation must
conform with local codes or, in the absence of local codes, with Propane Installation Code, CSA B149.1,
or Propane storage and Handling Code, B149.2 as applicable.
Installation in Canada must be in accordance with the standard CAN/CGA- B149.2.
A licensed contractor or local gas company representative must perform all gas connections.
Ensure that the service supplying the appliance is fitted with a shut off valve conveniently positioned near
the appliance and giving ease of access.
The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during
any pressure testing of that system.
Loading ...
Loading ...
Loading ...