Loading ...
Loading ...
Loading ...
SERVICE AND INSTALLATION MANUAL
www.maxxfoodservice.com
Ice Maker Installation
UNPACKING
Excessive Weight Hazard
Use two or more persons to move and install ice maker.
Failure to do so can result in back or other injury.
This unit is an ice maker only. It requires a separate ice storage bin.
REMOVE PACKAGING MATERIALS
IMPORTANT: Do not remove any permanent instruction labels or the data label on your ice maker.
Remove tape and glue from your ice maker before using,
• To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue
can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with
your ngers. Wipe with warm water and dry with a soft cloth.
• Do not use sharp instruments, rubbing alcohol, ammable uids, or abrasive cleaners to remove
tape or glue. These products can damage the surface of your ice maker.
LOCATION REQUIREMENTS
• This ice maker should be installed by qualied personnel.
Installation Clearance
DANGER
WARNING
CAUTION
6
Top View
2 3/8 “ 20 7/8”
6 5/8”
Minmimum
to wall: 6 “
Area for
dispensing ice
cubes to bin
Rear of machine
Minmimum
to wall: 6 “
Loading ...
Loading ...
Loading ...