Loading ...
Loading ...
Loading ...
Cleaning and Maintenance
The ice machine cleaner contains acids.
DO NOT use or mix with any other solvent-based cleaner products.
Use rubber gloves to protect hands. Carefully read the material safety
instructions on the container of the ice machine cleaner.
DISCARD the rst batch of ice produced after cleaning.
CONDENSER CLEANING
1. See drawing.
2. The air cooled condenser should be
vacuumed once or twice per year to
remove any lint that may have been
drawn into it. Using a tool that seems
like a probe to remove any lint from
the condenser ns.
NOTE: Do not touch condenser ns. They
are sharp and can be damaged easily.
Control Panel (at the left side of the machine)
You will nd the control panel at the left side of the
machine. This panel includes the clean button, the
mode button and four LED indicators.
OPERATION OF THE CONTROL PANEL:
1. When the unit is plugged in and the power switch
is turned on, the power indicator and the other
three indicator lights are all on.
2. After three minutes for water inlet, the ice maker
will start to make ice automatically. Only the
power and ice-making indicators will be on.
3. During harvest, the harvest indicator light is on
and ice-making indicator off. When the ice
storage bin is full, only the ice-full indicator and
power indicator are on.
NOTE: During the ice making cycle or harvest mode, the machine cannot enter the clean mode.
Pressing the clean button during the ice-making or harvest mode, it will be ignored. The ice-making
or harvest will continue.
4. When you want to clean the machine, turn off the power switch rst, then turn it on again. Press the
Clean button within 3 minutes and the ice maker will start the cleaning mode, with harvest and ice-
making indicators blinking. After 30 minutes, the cleaning mode stops and the harvest indicator and
ice-making indicators are on steady. If you want to restart the ice-making process after cleaning, turn
OFF the power switch rst, then turn on the power switch again and the machine will automatically
go into the ice-making process.
5. If you want to interrupt the cleaning mode before it is nished, do not press the Clean button again.
Instead, turn the power switch off. This stops the cleaning cycle.
6. If the unit is connected to the power supply but no visual indicator lights up when the power switch is
turned on, the fuse in the control panel box may need to be replaced.
DANGER
WARNING
CAUTION
15
Condenser
White LED
Green LED
Yellow LED
Red LED
Clean
Mode
Ice-Full
Ice-Making
Ice-Harvest
Loading ...
Loading ...
Loading ...