Loading ...
Loading ...
Loading ...
SERVICE AND INSTALLATION MANUAL
www.maxxfoodservice.com
• DO NOT use solvent-based cleaning agents or abrasives on the interior. These cleaners may
transmit taste to the ice cubes, or damage or discolor the interior.
• The ice machine cleaner contains acids. DO NOT use or mix with any other solvent-based cleaner
products. Use rubber gloves to protect hands. Carefully read the material safety instructions on
the container of the ice machine cleaner.
• Do not use this apparatus for other than its intended purpose.
SAVE THESE INSTRUCTIONS
Electrical Connection
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
For personal safety, this appliance must be properly grounded. The power cord of this appliance
is equipped with a 3-prong grounding plug that mates with a standard 3-prong grounding wall
outlet to minimize the possibility of electric shock hazard from the appliance. Have the wall outlet
and circuit checked by a qualied electrician to make sure the outlet is properly grounded. When
a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet. The ice maker should always be plugged
into its own individual electrical outlet which has a voltage rating that matches the rating label on
the appliance. This provides the best performance and also prevents overloading house wiring
circuits which could cause a re hazard from overheated wires. Never unplug your ice maker by
pulling on the power cord. Always grip the plug rmly and pull straight out from the outlet. Repair
or replace immediately all power cords that have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage along its length or at either end. When moving
the ice maker, be careful not to damage the power cord.
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly recommended that you
do not use an extension cord with this ice maker.
Major Features
1. Completely automatic operation.
2. The different colors of the LED display indicate various working modes.
3. The fan motor responds to the ambient temperature. If room temperature is low, the motor will
stop working to keep the cooling system in good working condition.
4. Ice cube size is adjustable.
5. Periodically draining water allows more pure ice and keep minimum mineral buildup.
6. A sensitive probe and accurate timer enhance the performance of the ice maker.
Technical Information
*The actual quantity of ice produced per day can vary with room and water conditions. The technical data and
performance indices listed above should be used for reference only. They are subject to change.
4
MODEL MIM452 MIM600 MIM1000
Electrical input 115VAC / 60Hz 230VAC / 60Hz 230VAC / 60Hz
Power consumption
(kW·h /100 lbs of ice)
7.3 6.49 5.8
Ice-making/Ice-harvest
rated current
12.4A/15.3A 7.6A/9.85A 9.2A/11.3A
Refrigerant R404A, 24.5oz. R404A, 45.8oz. R404A, 52.9oz.
High/Low side pressure 350psig/190psig 380psig/190psig 400psig/190psig
Unit width x depth x height 30”x 24”x 20. 7/8” 30”x 24’x 20. 7/8” 30”x 24”x 26. 5/8”
Unit weight 340 lbs maximum 155 lbs maximum 194 lbs maximum
Ice-making capability +400 lbs/day* +438 lbs/day* +780 lbs/day*
Ice shape Cube Cube Cube
Ice cube dimensions 3/4”x 1”x 3/4” 3/4”x 1”x 3/4” 3/4”x 1”x 3/4”
Loading ...
Loading ...
Loading ...