Waldorf GP8910GEC 800 Series 900mm Gas Griddle Electric Convection Oven Range

Installation Operation Manual - Page 15

For GP8910GEC.

PDF File Manual, 16 pages, Read Online | Download pdf file

GP8910GEC photo
Loading ...
Loading ...
Loading ...
16
Clean the range regularly. A clean range looks better, will last longer and will perform better.
Carbonised grease on the surface or on griddle plate will hinder transfer of heat from cooking surface
to food. This will result in loss of cooking efficiency.
NOTE: Each Heavy Duty Griddle is supplied with a scraper tool and a pack of blades for cleaning
the griddle surface.
- 1 Flat Blade (pack) - 1 Ribbed Blade (pack) and 2 handles for Ribbed Heavy Duty Griddle.
- 1 Flat Blade (pack) and I handle for Smooth Heavy Duty Griddle.
NEVER use ribbed scraper blade on flat chrome surfaced griddle plate.
Replacement blades and handles can be purchased separately. Refer to 'Replacement Parts
List' at rear of manual.
DO NOT use water on griddle plate while this item is still hot as warping and cracking
may occur. Allow griddle plate to cool down before cleaning.
NOTE:
DO NOT use abrasive detergents, strong solvents or caustic detergents as they could
corrode or damage the range.
To prevent rust forming on griddle plate (Steel Plate), ensure that any detergent or cleaning
material has been completely removed after each cleaning. Appliance should be switched
On briefly to ensure griddle plate becomes dry. Oil or grease should be spread over
griddle surface to form a thin protective greasy film.
To keep your range clean and operating at peak efficiency, follow procedures shown below:-
1. Clean griddle with supplied scraper tools to remove any food debris.
2. Always ensure scraper tool blades are changed regularly to ensure that scraper tool works efficiently
and prevents damage to griddle plate surface.
BLADES FITTED TO SCRAPER TOOL ARE EXTREMELY SHARP AND ARE TO BE USED WITH CARE.
13
1. Waldorf Gas Griddle Range Electric Oven have been designed to provide simplicity of operation and
100% safety protection.
2. Improper operation is almost impossible, however bad operation practices can reduce the life of the
appliance and produce a poor quality product. To use this appliance correctly please read the
following sections carefully:-
Lighting the Griddle - Pilots.
Lighting the Griddle - Main Burners.
Re-Setting the Overtemp Device.
Turning 'Off' the Griddle Main Burner / Pilot.
Static Oven (GP8910GE - GP8121GE).
Convection Oven (GP8910GEC - GP8121GEC).
Piezo Igniters
Ignites the Griddle
Pilot Burners.
Gas Griddle Controls
OFF Position
PILOT Burner
Temperature Gradient.
Fig 5
Oven Thermostat
Control
OFF Position
Temperature
Graduations 50°C to
320°C.
Power Indicator
Lamp (green)
Oven Top Heat Control
OFF Position
LOW Position
1 Position
2 Position
3 Position
4 Position
HIGH Position
Heating Indicator
Lamps (Amber)
for Top &
Bottom Elements
Loading ...