Loading ...
Loading ...
Loading ...
12
Before leaving the new installation;
Check the following functions in accordance with operating instructions specified in ‘Operation’
Section of this manual.
Light the Griddle Pilot Burner.
Light the Griddle Main Burner.
Check the Griddle Low Fire Operation.
Check the Oven Heating.
Check the Oven Thermostat Operation.
Check the Oven Fan Operation (GP8910GEC and GP8121GEC Ovens Only).
Ensure operator has been instructed in areas of correct lighting, operation, and shutdown procedure
for appliance.
This manual must be kept by owner for future reference, and a record of
Date of Purchase,
Date of
Installation
and
Serial Number of Appliance
recorded and kept with this manual. (These details
can be found on Rating Plate attached to bottom right hand corner of bottom sill. Refer to
‘Installation’ section).
NOTE: If for some reason it is not possible to get appliance to operate correctly, shut Off gas
supply and contact supplier of this appliance.
17
1. Grease drawer should be checked and emptied frequently to prevent overflow and spillage. Remove
grease drawer while still warm so that grease is in a liquid state. Empty any grease from drawer
and wash thoroughly in same manner as any cooking utensil.
2. Clean Control Panel with a damp cloth lightly moistened with a solution of mild detergent and water.
3. Thoroughly clean splash back, interior and exterior surfaces of range with hot water, a detergent
solution and a soft scrubbing brush.
4. Brush griddle surface with a soft bristled brush. Any carbon deposits should be removed using
supplied scraper tool followed by wiping with a cloth to prevent accumulation of food deposits.
5. Dry range thoroughly with a dry cloth and polish with a soft dry cloth.
NOTE: Chrome Griddle Plate; DO NOT use abrasive detergents, strong solvents or caustic
detergents as they could corrode or damage the chrome plate.
NOTE:
If griddle usage is very high, we recommend that weekly cleaning procedure is carried out
more frequently.
Ensure that protective gloves are worn during cleaning.
DO NOT use harsh abrasive detergents, strong solvents or caustic detergents as they will
damage range and burners.
DO NOT use water on griddle plates while they are still hot as warping may occur. Allow
these items to cool before cleaning.
Griddle - Steel Plate
NOTE: To prevent rust forming on griddle plate, ensure that all detergent and cleaning material has
been entirely removed after each cleaning process. Appliance should be switched On
briefly to ensure that griddle plate becomes dry. Cooking oil or grease should be spread
over griddle surface to form a thin protective greasy film.
a. Remove and clean grease collection drawer frequently to prevent over spills.
b. Clean griddle surface thoroughly with supplied scraper tool or a wire brush. If necessary use a
griddle stone or a scotch bright pad on griddle surface to remove stubborn or accumulated
carbon deposits.
c. Occasionally bleach griddle plate with vinegar when plate is cold.
d. Clean with hot water, a mild detergent solution and a scrubbing brush. Dry all components
thoroughly with a dry cloth.
e. Griddle should be switched On briefly to ensure that griddle plate becomes dry. A thin smear of
cooking oil should be spread over griddle in order to form a protective film.
Loading ...
Loading ...