Loading ...
Loading ...
Loading ...
24 Eaton Tripp Lite SmartOnline Series User Guide 614-40204—Rev 01
Figure 12. WEBCARDLXE
CONFIG
STATUS
RESET
NOTE Connect a Cat-6 shielded ethernet cable (F/UTP or F/FTP) or higher between the LXE
platform device’s ethernet port and a network jack.
It is not necessary to shutdown
the UPS before installing
a communication card.
1.
Remove the slot cover
4
secured by screws.
2.
Insert the communication
card in the slot.
3. Secure the card cover with
the 2 screws.
44..88 TTrriipppp LLiittee bbyy EEaattoonn PPoowweerrAAlleerrtt SSooffttwwaarree SSuuiittee
The Tripp Lite by Eaton PowerAlert software suite is available from www.tripplite.eaton.com. The PowerAlert
software suite provides up-to-date graphics representing UPS power and system data and power flow. It also
gives you a complete record of critical power events and notifies you of important UPS or power information.
In the case of a power outage, or the SmartOnline UPS battery power becomes low, the PowerAlert Software
suite can automatically shut down your computer system to protect your data before the UPS shutdown
occurs.
Tripp Lite by Eaton PowerAlert Software Suite
Loading ...
Loading ...
Loading ...