Loading ...
Loading ...
Loading ...
Before using for the first time en
9
Wire rack The open side must be facing the
appliance door and the curvature
must be at the bottom (i.e. ).
Tray, e.g. uni-
versal pan or
baking tray
The sloping edge of the accessory
must be facing towards the ap-
pliance door.
3.
To place the accessory at shelf positions with pull-
out rails, pull out the pull-out rails.
Wire rack or
baking tray
Position the accessory so that its
edge is behind the lug on the
pull-out rail.
Note:The pull-out rails lock in place when they are
fully pulled out. Gently push the pull-out rails back
into the cooking compartment.
4.
Push the accessory all the way in, making sure that
it does not touch the appliance door.
Note:Take any accessories that you will not be using
out of the cooking compartment while the appliance is
in operation.
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting the time
Once the appliance has been connected to the power
supply, three zeros flash on the display. Set the time.
1.
Press .
2.
Use or to set the time.
Note:Once the set time has elapsed, the time is auto-
matically saved.
6.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
1.
Remove the accessories from the cooking compart-
ment and remove the shelves. →Page14
2.
Completely remove any leftover packaging, e.g.
small pieces of polystyrene, from the cooking com-
partment.
3.
Some parts are covered with a protective film. Re-
move this scratch protection film.
4.
Clean the outside of the appliance with a soft, damp
cloth.
5.
Clean the cooking compartment with hot soapy wa-
ter.
6.
To eliminate the new-appliance smell, heat up the
empty appliance with the door closed.
7.
Turn the function selector to
5
.
8.
Set the maximum temperature.
If you are heating up the appliance for the first time,
you may hear crackling noises from the cooking
compartment.
9.
Ventilate the kitchen while the appliance is heating.
10.
Switch off the appliance after 1hour.
11.
Allow the appliance to cool down.
12.
Once the cooking compartment has cooled down,
clean the smooth surfaces with soapy water.
13.
Install the rails. →Page14
14.
If necessary, clean the door panels. →Page14
6.3 Cleaning the accessories
▶
Clean the accessory thoroughly with soapy water
and a soft dish cloth.
7 Basic operation
7.1 Switching on the appliance
WARNING‒Risk of explosion!
If gas is collecting in the cooking compartment, this
may cause an explosion in the cooking compartment
during ignition.
▶ If the burner does not ignite after 15 seconds,
switch off the appliance and open the door or a win-
dow in the room.
▶ Wait at least 1minute before igniting the burner
again.
1.
Open the appliance door.
Loading ...
Loading ...
Loading ...