Loading ...
Loading ...
Loading ...
Time-setting options en
11
3.
Slide the universal pan into shelf position 1 and
place the rotary spit into the motor bracket.
4.
Pour some water into the universal pan to better
catch any fat that drips out.
5.
Close the appliance door.
8.3 Switch on the rotary spit
Note:If you are using the rotary spit, preheat the oven
with the type of heating. Insert the rotary spit before
you set the heating function .
1.
Set the temperature selector to .
2.
Set the function selector to .
8.4 Removing the rotary spit
WARNING‒Risk of burns!
The appliance and its parts that can be touched be-
come hot during use.
▶ Caution should be exercised here in order to avoid
touching heating elements.
▶ Young children under 8 years of age must be kept
away from the appliance.
1.
Open the appliance door.
2.
Slowly pull out the universal pan until this protrudes
halfway out of the cooking compartment.
3.
Pull the universal pan fully out of the cooking com-
partment and place it on the worktop.
4.
Screw the handle onto the rotary spit.
5.
Remove the rotary spit from the rotary spit frame by
the handle.
9 Time-setting options
9.1 Setting the short-term timer
The timer has no influence on the functions of the
oven.
Note:You can set the time on the short-term timer from
1minute up to 23hours and 59minutes.
1.
Press .
a flashes and three zeros are displayed.
2.
Use and to set the required duration.
a A signal tone sounds once the time has elapsed.
Notes
¡ To change the remaining time, press and use
or to change the remaining time.
¡ To cancel the short-term timer, press . Then press
and at the same time.
Switching off the signal tone
▶
Press to switch off the signal tone.
Note:After a few minutes, the signal tone stops auto-
matically.
9.2 Setting the time
If required, you can change the time, e.g. from summer
time to winter time.
Requirement:The appliance is switched off.
1.
Press and hold and at the same time.
2.
Use and to set the time.
a After a few seconds, the set time is displayed.
9.3 Changing the signal tone
You can choose from 3 different signal tones.
1.
Press and at the same time.
2.
Press .
a The signal tone that is currently selected is shown
on the display, e.g. "Tone1".
3.
Press to select another signal tone.
10 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
10.1 Cleaning products
To avoid damaging the various surfaces on the appli-
ance, do not use any unsuitable cleaning agents.
WARNING‒Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶ Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
▶ Do not use harsh or abrasive cleaning products.
▶ Do not use cleaning products with a high alcohol
content.
▶ Do not use hard scouring pads or cleaning
sponges.
▶ Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
Loading ...
Loading ...
Loading ...