Loading ...
Loading ...
Loading ...
RECORDING VIDEO ▸ FOCUSING
223
Changing the position of the enlarged section
▸ Swiping will allow you to move the position of an enlarged cropped
section
or
▸ Press the joystick in the relevant direction
Exiting the enlargement function
▸ Tap the shutter button
Note
• The enlargement function remains active until it is exited.
DISTANCE DISPLAY
Distance information is shown in the top display during manual
focusing.
– Focus Mode MF: when the shutter button is pressed to the first
pressure point
– Focus Mode AF: when the shutter button is pressed and held at
the first pressure point, followed by a turning of the focus ring
The unit of measure (
m or ft) can be selected, see p. 81.
Note
• The focus distance is estimated based on the focus position trans-
mitted by the lens.
FOLLOW FOCUS
This function facilitates automatic transitions to specified focus
settings (focus positions). Up to threes such focus positions can be
pre-configured and optionally be set up with a delay time. When a fo-
cus position is accessed, the camera will automatically focus on the
set distance. The transition will then be achieved smoothly and with
a configurable speed. That way, soft, almost unnoticeable transitions
are created. Prerequisite is that the relevant distances are known
beforehand.
The specified focus positions can be accessed individually or in an
automated sequence.
▸ Select
Focusing in the main menu
▸ Select
Focus Mode
▸ Select Follow Focus
▸ Select Focus Position
• “Follow Focus” is activated. The Follow Focus menu appears.
• The Follow Focus menu remains visible until the function is
exited.
Loading ...
Loading ...
Loading ...