Loading ...
Loading ...
Loading ...
9
12
Connect a monitor to the OUTPUT 1 port on the receiver unit using a
Tripp Lite P568-Series High-Speed HDMI cable.
13
Repeat step 12 for the OUTPUT 2 port on the receiver unit.
14
Connect the external power supply to the receiver unit and plug the
receiver unit into a Tripp Lite Surge Suppressor, PDU or UPS. The
green RJ45 LED illuminates to indicate that it is receiving power from
the external power supply.
15
Turn on the power to the connected devices. The orange RJ45 LEDs
on all units will illuminate to indicate that a signal is being received
from the HDMI source. The video image will now be displayed on the
connected monitors.
16
If necessary, use the Equalization control on the repeater and receiver
units to adjust the video image.
Note: An improper Equalization setting can cause the monitor not to display an
image at all. Try each setting until an acceptable image is displayed.
1 x 2 Extender Kit with
Remote/Repeater Installation
Loading ...
Loading ...
Loading ...