Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/89345208-b126-2a1/bgc.png)
12
10
Turn on the power to the connected devices. The orange RJ45 LEDs
on the transmitter and receiver units will illuminate to indicate that
a signal is being received from the HDMI source. The video image
should now be displayed on the connected monitors.
11
If necessary, use the Equalization control on the receiver unit to
adjust the video image.
Note: An improper Equalization setting can cause the monitor not to display an
image at all. Try each setting until an acceptable image is displayed.
Standard Extender/Splitter Installation
Loading ...
Loading ...
Loading ...