Tripp Lite B126-2A1 Owner's Manual

Loading ...

Standard Extender/Splitter Installation

Make sure all devices being connected are powered OFF.

Connect the HDMI source to the INPUT port on a B126-002 or

B126-004 transmitter unit using a Tripp Lite P568-Series High-Speed

HDMI Cable.

Optional for B126-004: Connect a monitor to the LOCAL port on

the transmitter unit using a Tripp Lite P568-Series High-Speed HDMI

Cable.

Connect the external power supply to the transmitter unit and

plug the transmitter unit into a Tripp Lite Surge Suppressor, Power

Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The

green RJ45 LEDs on the B126-002 and B126-004 and the red

power LED on the B126-004 will illuminate to indicate that the unit is

receiving power from the external power supply.

Using Cat5e/6 cable, connect a RJ45 OUTPUT port on the transmitter

unit to the RJ45 INPUT port on the B126-2A0 1x2 receiver unit.

Repeat step 5 to add receiver units to the remaining RJ45 OUTPUT

ports on the transmitter unit.

Connect the external power supply to the receiver unit and plug the

receiver unit into a Tripp Lite Surge Suppressor, PDU or UPS. The

green RJ45 LED illuminates to indicate that the unit is receiving

power from the external power supply.

Connect a monitor to the OUTPUT 1 port on the receiver unit using a

Tripp Lite P568-Series High-Speed HDMI Cable.

Repeat step 8 for the OUTPUT 2 port on the receiver unit.

Loading ...

Tripp Lite B126-2A1 1 x 2 HDMI over Cat5/6 Extender Kit