Tripp Lite B126-2A1 Owner's Manual

Loading ...

Extender/Splitter with

Remote/Repeater Installation

Notes:

1. Test to make sure that the entire installation works properly before running

cables through ceilings/walls.

2. The diagram below shows the maximum extension distance when using either

Cat5e or Cat6 cabling. 24 AWG solid wire Cat5e/6 cable, such as Tripp Lite’s

N202-Series, is required to achieve maximum distance and resolution.

3. The B126-002 and B126-004 are set to transmit a stereo audio signal by

default. Press the Audio button on the transmitter unit to switch to 7.1-channel

surround sound audio. (7.1-channel surround sound signal will be Multi-Channel

or PCM)

4. The diagram below shows the B126-004 transmitter unit. Installation is the

same for the B126-002, except that there are only two output ports and no local

monitor port.

5. Although the installation instructions below mention the B126-2A0 1x2 receiver

unit only, Tripp Lite offers two additional active receivers that can be used in the

event that only one monitor is needed at the end of a repeater chain: B126-1A0

and B126-1A0-WP-1.

Loading ...

Tripp Lite B126-2A1 1 x 2 HDMI over Cat5/6 Extender Kit