Loading ...
Loading ...
Loading ...
(, • 9_
See pa_.e . h)r the operalicm of the advanced setup.
• Speaker impedance ................
*...i..., i r,'ll..,
....,_ a.l II •
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8_Q MIN 6_Q MIN
• Select "8f2 MIN" to set the speaker impedance to 8 f2
• Select "6f2 MIN" to set the speaker impedance to 6 L)
8__)MIN
6_ MIN
Front
If you use one set (A or B),
the impedance of each
speaker must be 8 t) or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 16 t) or
higher."
Center
The impedance of each
Surround speaker must be 8 _ or
higher.
Surround back
Front
If you use one set (A or B),
the impedance of each
speaker must be 4 t) or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 8 t) or
higher.
Center
The impedance of each
Surround speaker must be 6 _ or
higher.
Surround back
• Remote control AMP ID i:;?.EMI;'TEl:ir"il:::'
Use this feature to set the AMP ID of this unit t_r remote
control recognition. This feature is useful when you
operate this unit and the other Yamaha receivers/
amplifiers in the same room separately.
Choices: ID1, ID2
• Select "lDl" when the remote control AMP ID code is
set to "00001 ".
• Select "lD2" when the remote control AMP ID code is
set to "00002".
Setting remote control AMP ID codes
You need to set the remote control AMP ID code for the
remote control.
Press @CODE SET using a ballpoint pen or
a similar object.
The @TRANSMIT indicator on the remote control
flashes twice.
mA_SMIT
Flashes
Press the numeric buttons (®) to enter the
code number "00001" or "00002".
The @TRANSMIT indicator on the remote control
flashes twice, and the AMP ID code is changed.
CLASSICAL LIV_CLUB ENTERTAIN MOVIE
STEREO E T TRA_SMI_
$U_,DE_0DE
Flashes
'_ The Canada model canm)t use two separate speaker systems
(A and B) simullaneously when "SP IMP." is set to "8f2MIN".
• User presets i::)i:::,c',i::'i::_'Ti r,,L,,,,,,q,,,, i
Use this feature to reset all the parameters of this unit to
the initial factor), settings (see page 103).
Choices: CANCEL, RESET
• Select "CANCEL" not to reset any parameters of this
unit.
• Select "RESET" to reset the parameters of this unit.
Noia :
• This setting completely resets all the parameters of this unit
including the "SET MENU" parameters.
• The initial lhctory settings are activated next time you turn on
this unit.
00001 To operate this unil using IDI
(inilial setting) the defauh code. /inilial setting)
00002 To operate this unil using ID2
an a]lernalive code.
_1 The rmnole conlrol setting
2 The selting of this trail
93 En
Loading ...
Loading ...
Loading ...