Loading ...
Loading ...
Loading ...
Be sure to connect the left channel (L), right channel (R), "+" (red) and "-" (black) properly. If the connections are faulty,
this unit cannot reproduce the input sources accurately.
Caution
• Before connecting the speakers, make sure that this unit is turned off (see page 25).
• Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This coukt damage
this unit and/or the speakers. If the speaker wires are short-circuited, "CHECK SP WIRES" appears in the front
panel display when you turn on this unit.
• Use the magnetically shielded speakers. If this type of speaker still creates interference with the monitor, place the
speakers away from the monitor.
• If you are to use 6 ohm speakers, be sure to set "SP IMR" to "6f2 MIN" before using this unit (see page 25). 4 ohm
speakers can be also used as the front speakers (see page 93).
A speaker cord is actually a pair of insulated cables running side by side. Cables are colored or shaped dilt'erently, perhaps with a stripe,
groove or ridge. Connect the striped (grooved, etc.) cable to the "+" (red) terminals of this unit and your speaker. Connect the plain cable
to the .... (black) terminals.
EXTRA SP terminals
Connect the alternative li'ont speaker system (FRONT B), presence speakers or Zone 2 speakers.
To select the function of the speakers commcted to the EXTRA SP terminals, set the "EXTRA SP
ASSIGN" parameter in "SOUND MENU" (see page 72).
You can also select the function of the speakers connected to the EXTRA SP terminals in "AUTO
SETUP" (see page 29).
Subwoofer
Right Left
Front speakers
(FRONT A)
Right Left
Surround speakers
Center speaker
Right Left
Surround back speakers
When you use single surround back speaker, connect
the speaker to the lefl SURROUND BACKterminal
(SINGLE).
13 En
Loading ...
Loading ...
Loading ...