Loading ...
Loading ...
Loading ...
ILT_ _.1. t _ u r•iCEt _ ,u n EIJTJLqLq#L'YI_-_l#J:L
Use this feature to manually adjust speaker settings or
compensate for video signal processing delays when using
LCD monitors or projectors. Most of the SOUND MENU
parameters are set automatically when you run AUTO
SETUP (see page 28).
I,Jg41qLIF4L SETUP
I SOUI_I) I,tEl_tl I'2
+ I:I?SF'EAKER SET
B)SF'EPKER kEHI_:L
C)SF' Di STPHCE
D )EQLIFILIZER
E)KFE LEUEL
[ ak] '[',_'] : UF '[lo_._n
[EHTER ] :Enter
MIqI,ILIPL SETLIF'
I SOLII_D MEMU 2/2
÷ F)DYHI:tI'IIC RRMGE
G)PLIDIO SET
H) HDI'il SET
I)EXTD SUR.
[ak] ['_']_UF 'Dc,_,'n
[EHTER ] ::Enter
• Speaker settings """':::i:::'c''"i"c'i:::',:::'_::'"r
Use this feature to manually adjust any speaker settings.
SOLIH) l,tEiqLI
÷ EXTRP SF' PSSIGI4
ZOI4E2 ;FROI4T B
PRESEHC:E HOME
FROI,4T B .....FROHT
F'RI ORi r','_ ........
Z OHIE2 SET
M,:,i. F'v._i ] .=J:,le
Extra speakers assignment EXFRI::i :!!!;[::'gl:!!!;S]:(!!ii"i
Selects the function of the speakers connected to the
EXTRA SP terminals.
Choices: FRONT B, ZONE2, PRESENCE, NONE
When you use the alternative front speaker
system (see page 38)
Select "FRONT B".
When you use the Zone 2 speakers (see
page 90)
Select "ZONE2" to set the function of the speakers to
the Zone 2 speakers.
When you use the presence speakers (see
page 12)
Select "PRESENCE" to set the function of the
speakers to the presence speakers.
When you do not use the EXTRA SP terminals
Select "NONE" to deactivate the EXTRA SP
terminals.
FRONT B speakers setting F'ROiqT" B
The "FRONT B" parameter is awdlable only when you set
"EXTRA SP ASSIGN" to "FRONT B".
Use this feature to select the location of the FRONT B
speakers.
Choices: FRONT, ZONE B
• Select "FRONT" to turn FRONT A and B on or off
when the FRONT B speakers are set in the main room.
• Select "ZONE B" if the FRONT B speakers are set in
another room. If FRONT A is turned off and FRONT B
is turned on, all the speakers including the subwoofer
in the main room are nmted and this unit outputs sound
at the FRONT B terminals only.
• If you connect headphones to tire PHONES jack ofthis uniL the
sound is output fi'om both the headphones and tire EXTRA SP
lerminals when "FRONT B" is set to "ZONE B".
• If a DSP program is selected when "FRONT B" is set to
"ZONE B". Ihis unit automatically enters tile Virtual CINEMA
DSP mode (see page 46).
Presence/Surround back channel priority
i:)i:::, T i"_i::) T "i" L J
Tire "PRIORITY" parameter is available only when you
set "EXTRA SP ASSIGN" to "PRESENCE".
Use this feature to prioritize either the presence or the
surround back speakers when playing sources that contain
surround back channel signals using the CINEMA DSP
sound field programs.
Choices: PRNS, SUN. B
• Select "PRNS" to use the presence speakers even when
surround back channel signals are input. The signals
for the surround back channels will be output from the
surround speakers.
• Select "SUR. B" to use the surround back speakers
w,hen surround back channel signals are detected in a
CINEMA DSP program. The presence channel signals
are output from the front speakers.
• This parameter shares the value with the "EXTRA SP
ASSIGN" parameter it] "AUTO SETUP".
• If you select "ON" it] "BI_AMP" (see page 95), you cannot
select "PRESENCE" or "ZONE2" in "EXTRA SP ASSIGN".
• Aller changing the "EXTRA SP ASSIGN" setting, carry out
"AUTO SETUP" again (See page 28).
72 En
Loading ...
Loading ...
Loading ...