Loading ...
Loading ...
Loading ...
This unit allows you to configure a multi-zone audio system. The Zone 2 feature allows you to set this unit to reproduce
separate input sources in the main zone and the second zone (Zone 2). You can control this unit from the second zone
using the supplied remote control.
Only analog signals are sent to the second zone. Any source you want to listen to in the second zone must he
connected to the analog AUDIO IN jacks of this unit.
You need the following additional equipment to use the nmlti-zone flmctions of this unit:
• An infrared signal receiver in the second zone.
• An infrared signal emitter in the main zone. This emitter transmits the infrared signals from the remote control via the
infrared signal receiver in the second zone to a CD player or a DVD player, etc. in the main zone.
• An amplifier and speakers in the second zone.
• Since there are many possible ways to commct and use this unit in a multi-zone configuration, we recommend that you consult with
your nearest authorized Yamaha dealer or service center about the Zone 2 connections that best meet your requirements.
• Some Yamaha models are able to connect directly to the REMOTE.jacks of this unit. If you own these products, you may not need to
use an infl'ared signal emitter. Up to 6 Yamaha components can be connected as shown below.
REMOTE REMOTE REMOTE REMOTE
,N,,. O0T'N"!__ __ OOT .....,,-
o I
Infrared signal This unit Yamaha Yamaha
receiver component component
• Using the external amplifier
Connect the amplifier/receiver in the second zone and other components to this unit as follows.
%
Main zone
I
DVD player This unit
/- Infrared signal cmillcr
(u
From the ZONE 2 OUT jacks
Amplifier
Second zone
(Zone 2)
From the REMOTE OUT jacks From the REMOTE IN jacks
To avoid mmxpecled noise. DO NOT USE the Zone 2 feature with CDs encoded in DTS.
.... Infrared signal receiver
89 En
Loading ...
Loading ...
Loading ...