Loading ...
Loading ...
Loading ...
Ifp_,_mla.l,fi'; i-
• To use the "TV Viewing" template (Case B), you must connecl
a salellile receiver, a cable TV receiver or an HDTV decoder Io
this unit in advance. See page 20for details.
• To use the "Radio Listening" template (Case C), you haxe to
tune into the desired radio station. See pages 5(1to 52 for the
tuning information.
• To achieve the best possible reception, orient the connected AM
loop antenna, or atljust the position of the end of the indoor FM
antenna.
--'4_'--
If you cannot findthe desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 33 for details.
• After using this unit...
Press _)MAIN ZONE ON/OFF to set this unit to
the standby mode.
• Customizing the SCENE templates
• Using various SCENE templates
r_ p. 33
• Creating your original SCENE templates
r,_ p. 36
• Using various input sources
• Basiccontrols of this unit
r_ p. 37
• Enjoying FM/AM radio programs
_ P. 50
• Enjoying XM Satellite Radio programs
_ P. 53
• Using your iPod with this unit.
_ P. 58
This unit is set to the standby mode and consumes a small
amount of power in order to receive infrared signals from
the remote control. To turn on this unit from the standby
mode, press the desired @SCENE buttons (or
(_SCENE) or @MAIN ZONE ON/OFF on the front
panel (or @POWER on the remote control). See page 25
for details.
• Using various sound features
• Using various sound field programs
_ P. 42
• Using the pure direct mode for high fidelity
sound
_-_ P. 48
• Customizing the sound field programs
_> P. 61
• Adjusting the parameters of this unit
• Automatically optimizing the speaker
parameters for your listening room
(AUTO SETUP)
_ P. 28
• Manually adjusting various parameters of
this unit manually
_,_ P. 71
• Setting the remote control
_._ P. 84
• Adjusting the advanced parameters
r.> p. 92
• Additional features
Automatically turning off this unit
_> P. 41
10 En
Loading ...
Loading ...
Loading ...