Loading ...
Loading ...
Loading ...
IIT;Tfi,3F_b'7;T_hl r
No sound is heard "LFE/BASS OUT" in "SET MENU" is Set "LFE/BASS OUT" to "SWFR" or "BOTH". 72
from the subwoofer, set to "FRONT" when a Dolby Digital or
DTS signal is being phlyed.
"LFE/BASS OUT" in "SET MEN U" is Set "LFE/BASS OUT" to "BOTH". 72
set to "SWFR" or "FRONT" when a 2-
channel source is being played.
Tile source does not contain low-
fiequency signals.
Dolby Digital or DTS Tile connected component is not set to Make an appropriate setting 12)llowing the operating
sources cannot be output Dolby Digital or DTS digital instructions for your component.
played. (Dolby Digital signals.
or DTS indicator in
the front panel Audio input jack select is set Io Set Audio inpul jack select to "AUTO". 39
display does not light "ANALOG".
up.)
A humming sound is Incorrect cable connections. Connect the :radio cables firmly. If the problem
heard, persists, the cables may be defective.
No connection from Ihe turntable to Ihe Connect the grounding cable of your turntable to the 2 I
GND terminal. GND temdnal of this unit.
The volume level is The record is being played on a turntable Connect your turntable to tiffs unit tlmmgh an MC- 2 I
low while a record is with an MC cartridge, head amplifier.
being played.
The volume level The component connected to the AUDIO Turn on tile power of the component.
cannot be increased, OUT (REC) jacks of this unit is turned
or the sound is off.
distorted.
The sound effects It is not possible to record the sound
cannot be recorded, effects with a recording component.
A source cannot be The source component is not connected to Connect the source component to tile DIGITAL 19, 21
recorded by a digital the DIGITAL INPUT jacks of tiffs unit. INPUT jacks.
recording component
connected to the Some components cannot record Dolby
DIGITAL OUTPUT Digital or DTS sources.
jack.
A source cannot be The source comlxmcnt is not connected to Connect the source component to the analog AUDIO 2 I
recorded by an the analog AUDIO IN .jacks of tiffs unit. IN jacks.
analog component
connected to the
AUDIO OUT (REC)
jacks.
The sound field "MEMORY GUARD" in "SET MENU _ Set "MEMORY GUARD" to "OFFL 82
parameters and some is set to "ON".
other settings of this
unit cannot be
changed.
This unit does not The internal microcomputer has been Disconnect the power cable from the AC wall outlet
operate properly, fiozen by an external electric shock (such and then plug it in again after about 30 seconds.
as lightning or excessive static electricity)
or by a power supply with low voltage.
No sound is heard The HDMI component does not accept Ihe Convert the multi_channel audio signals to the 2-
from the connected multi-channel audio signals, channel audio signals at tile source component such
HDMI component, as a DVD player.
98 En
Loading ...
Loading ...
Loading ...