Loading ...
Loading ...
Loading ...
CAREANDCLEANING
RemovableParts
CAUTION: You
must disconnect
electrical power
to the oven at the main
circuit breaker or fuse box before
attempting to replace oven light
bulbs. Do not touch the light
bulbs with bare hands. The bulbs
get very hot very quickly. Wrap
foam rubber from bulb package
around bulb when installing.
When removing the bulb, wait
until the bulb has cooled and
use a dry cloth.
To give you the best lighting available,
your oven has two halogen bulbs.
Both lights are on the ceiling of the
oven cavity.
Receptacle Socket
Bulb with
Wrapping
Tab
Glass
Cover
TO REMOVE
1. You must disconnect electrical
power to the oven at the main
circuit breaker or fuse box.
2. Turn the glass cover
counterclockwise V4turn until the
tabs of the glass cover clear the
grooves of the socket.
3. Pull straight out to remove
the bulb.
TO REPLACE
1. Wrap bulb with cotton cloth or
bulb packaging material. Don't
touch bulb with your fingers.
.
.
4,
5,
Push bulb straight into receptacle
all the way. Use only a 120-volt,
35-watt Halogen bulb.
Place the tabs of the glass cover
into the grooves of the socket.
Turn the glass cover clockwise
1/4turn.
Reconnect electrical power to the
oven at the main circuit breaker or
fuse box.
CLEANING MATERIALS
• Dishwashing detergent
• Warm water
• Scouring pad or soap-filled pad
Bump in
.ec.G-ida
Raised Back_
of the Rack
TO REMOVE
1. Pull the racks out to the stop position.
2. Pull up the front of the rack and slide
under the bump of the rack guide.
TO CLEAN
Clean with warm water and detergent. For
hard-to-remove stains, gently scrub with a
scouring pad or a soap-filled pad. Rinse
well. Gray porcelain-coated oven racks
may be cleaned in the oven during the
self-clean cycle.
TO REPLACE
1. Place the raised back of the rack onto
the rack guides.
2. Lift the front of the rack until the raised
back slides under the bump of the
rack guides.
3. Slide the rack all the way back.
32
Loading ...
Loading ...
Loading ...