Loading ...
Loading ...
Loading ...
Your
Refrigerator
It is important to prepare your refrigerator for use. This
section tells you how to clean it, instal it, connect it to a
power source, and level it.
UHpacRiHg Veu ef ige ate
Excessive Weight Hazard
Use two or more people to move refrigerator.
Failure to do so can result in back or other injury.
Removing packaging materials
÷ Remove tape and any labels from your refrigerator
before using (except the model and serial number label).
To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also
be easily removed by rubbing a small amount of liquid
dish soap over the adhesive with your fingers. Wipe with
warm water and dry.
÷ Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue.
These products can damage the surface of your refrig-
erator. For more information, see "Important Safety
Instructions" in the "Refrigerator Safety" section.
÷ On some models, shelves, bins, door shelf rails, and
other feature parts ma_,=bepackaged in the Finishing
Touches FeaturePak ill. Follow the instructions con-
tained in the package for proper assembly.
÷ To remove the protective (transparent) film that is on the
nameplate, which is located on the freezer handle, use
your fingernail and peel off the film, starting from one
side and peeling to the other.
I_PORTANT:
÷ Do not remove any permanent instruction labels inside
your refrigerator, or the Tech Sheet that is fastened to
the base grille.
÷ Do not remove the white Styrofoam insert that is located
behind the control panel on the ceiling of the refrigerator.
The insert is part of the refrigerator and not part of the
packing material. When the insert is removed, ice may
migrate down from the freezer and cause icicles to form.
10
Loading ...
Loading ...
Loading ...