UI24R User Guide

Loading ...

4.6: MASTER CHANNEL

CHANNELS > MASTER CHANNEL

4.6: MASTER CHANNEL

Ui24R User Manual

TheMasterStereoChannelistheoutputchannelforthemainstereo(left&right)mix-determinedbythe

input channel and FX Return channel faders and pan/balance controls. The Master Channel has its own

EDITpagetabs,justlikeotherchannels(seesection5).TheEQforUiOutputchannels(includingAux

Masters)isaGraphicEQ(GEQ)ratherthanaparametricEQ(inputchannelsandsubgroupmasters).

TheMasterFader(redfaderknob)controlstheoveralloutputvolumeofyourmixer.Theactuallevelsetby

thefaderisshowninthetopdisplayabovethefaderindB(decibels).

Display & Indicators

As well as dB, this display also has 3 useful indicators:

CLIP (C)

Notiesyouofanyinputgainclipping.Whenaninputchannelsignal

is too hot and likely to be distorting, press this display to jump to the

DASHBOARD page. In DASHBOARD, press the word GAIN in the

top right corner of the bank that is clipping, then reduce the channel

GAIN fader.

MUTE (M)

This indicates that a channel is muted. Press the display to see the

DASHBOARD overview where all mutes are viewable.

SOLO (S)

This indicates that a channel is in solo mode. Press the display to

see the DASHBOARD overview where all SOLOS are viewable.

BALANCE (Tablet Software)

The horizontal Balance fader allows the volume of left and right

to be increased or decreased, but the mix of left and right is un-

changed. Double press the balance slider to return it to the centre

position. To adjust balance in Phone Software, double tap the

Master Channel name to access its EDIT page.

F1 & F2 Buttons (Tablet Software)

ThepictureshowsF1andF2setasPLAYandRECORD(Ui24R).

F1 and F2 are programmable buttons that can be used for multiple

options. These options are selectable in SETTINGS > CONFIGU-

RATION. The options are: New Snapshot, Update Current Snap-

shot,Play,Record(Ui24RlatestFirmware,Ui24R).

If Record is selected, press record to start recording directly to your

USB stick. The REC button will highlight in red. You must have a

USB stick mounted to make a recording.

DIM

WhenshowntheDIMbuttonwillDIM(reduce)theoutputlevelby

20dB, this is generally used when monitoring in the Studio.

PHONE

TABLET

Loading ...

User Guide - Page 65