UI24R User Guide - Page 102

Loading ...

Ui24R User Manual

10.0: SETTINGS

SETTINGS

10.0: SETTINGS

TheSETTINGSpageallowstheusertomanagebasicsetupcongurations,networkparameters

(includingthepasswordsettingfortheWiFiaccesspoint),GUIpreferences,andaccesspermissions

on a per-user basis. Phone and tablet software versions display the settings in slightly different forms,

but al are accessible on either platform. The sub headings used in this section refer to the Tablet

software.

SETTINGS PRESETS

You can save your GUI settings to, and load your GUI settings from a USB memory stick by touching the PRESETS

button in the corner of the Settings page. This will open up a standard save / load screen.

GLOBAL

HEADPHONES OUT

HP CHANNELS

Select between L/R or R/L headphone split.

SOLO MODE

SINGLE, MULTIPLE

SINGLE deactivates any previous solo when a new one is pressed. MULTIPLE is an accumulative solo mode

(previoussolosarenotdeactivated).

SOLO TYPE

AFL, PFL

ChooseaSolotypeforchannelsolos.PFL(PreFadeListen)isa‘tap’beforethechannelfader,soyoucanmonitor

thechannelsignalwithouthavingtopushthefaderup.AFL(After-FadeListen)isatapafter(andaffectedby)the

channel fader.

2 TRK RECORD MODE

32-bit, 24-bit, 16-bit

Choose a sample rate for the media recording function.

AUX SEND MUTE INHERITENCE

Aux mute affecting global settings can be set to on or off in post mode only. The inheritance means taking

the mute button status from the main mixer to the Aux send as well or mute should be handled individually

 ineachmixer(MainandAux)

HEADPHONE 1 and 2 VOLUME CONTROLLERS and SOLO level

The volume for Headphone out 1 and 2 can be controlled within the GUI. The headphone volume pot on

the interface controls the volume for Headphone 1 output only. Solo controls the level of Solo to the head-

phones

Loading ...