UI24R User Guide

Loading ...

2.2: HARDWARE I/O & CONTROL

GETTING STARTED > HARDWARE

2.2: Hardware I/O And Control

TheUimainunit’sfrontpanelhostsalllocalaudioinputsandoutputsplusthreemasterlevelcontrols.

Ononesidepanelyouwillndthepowerconnectorandpowerswitch;ontheotheryouwillndthe

RESETbutton,FOOTSWITCHconnection,twoUSBports,andtheEthernet(wiredLAN)connection).

COMBO INPUT

Connectionfor1/4”TRS/TSJack(Line)orXLR(Miclevel)

The input number corresponds to channel number in the Ui control software.

XLR Input

Mic XLR Input

The input number corresponds to channel number in the Ui control software.

Ui24R User Manual

PHONES

Set level for headphones outputs

This controls the overall level of headphone output one. Individual headphone volume control can be

achieved through the SETTINGS control page. The headphone source signal defaults to the main stereo

signal but switches to the Solo bus when AFL or PFL is selected.

MIX L / MIX R

Set levels for MIX L and Mix R outputs

TheMixoutputistheUi’smainleft/rightstereooutputandappearsonboththeXLRandJackMixL/Rout-

puts.

LINE IN

Line level RCA inputs

The RCA inputs feed the Line In L and Line In R channels in the UI mixer.

HEADPHONES OUT

Headphone sockets

These are not independent, meaning each output receives the same signal. The headphone outputs receive

the same audio signal as the main outputs unless a channel Solo is active note the volumes can be inde-

pendently controlled in the SETTINGS page as well as the SOLO level.

Loading ...

User Guide - Page 12