Loading ...
Loading ...
Loading ...
Fig. 11
u
Undo the soft stop mechanism screw with a T15 screwdriver
approx. 14 mm.
Fig. 11 (1)
u
Insert a screwdriver behind the soft stop mechanism on the
handle side and rotate forwards.
Fig. 11 (2)
u
Remove the soft stop mechanism.
Fig. 11 (3)
4.3.2 Remove the bottom soft stop mechanism
Fig. 12
u
Open the bottom door.
NOTICE
Risk of damage!
If the door seal is damaged, the door may fail to close properly
and the cooling will be inadequate.
u
Do not damage the door seal with the screwdriver!
u
Unlatch the panel with a slotted screwdriver and swivel it to
one side.
Fig. 13
CAUTION
Crushing hazard by joint folding up!
u
Engage safety device.
u
Engage the locking device in the opening.
Fig. 14
u
Remove the bearing bracket cover and push it along the
hinge.
Fig. 14 (1)
u
Lift the bolt with a finger or screwdriver from below.
Fig. 14 (2)
u
Insert the screwdriver under the bolt head and remove.
Fig. 14 (3)
Fig. 15
u
Turn the hinge in the direction of the door.
Fig. 15 (1)
u
Remove the bearing bracket cover.
Fig. 15 (2)
Putting into operation
* Depending on model and options 9
Loading ...
Loading ...
Loading ...