Loading ...
Loading ...
Loading ...
The plus symbol is greyed out if it is pressed again after
selecting the hottest temperature. The standby symbol is
displayed on the screen.
u
Confirm the required temperature with OK.
w
The display switches to the home screen.
w
The selected temperature is displayed.
w
Up or down arrows indicate the change in temperature. The
arrows are greyed out when the target temperature is
reached.
5.5.3 Fan
When the fan runs, the relative humidity in the interior increases
so that the cork does not dry out.
When the fan is activated, the energy consumption increases.
To save energy, the fan switches off automatically when the
door is open.
Switching on the fan
u
Press menu.
u
Press the navigation arrows until the fan is
displayed.
u
Press ON.
w
The fan is switched on.
To switch off the fan
u
Press menu.
u
Press the navigation arrows until the fan is
displayed.
u
Press OFF.
w
The fan is switched off.
If the compressor is running, the ventilator runs even if it is
switched off. It switches off automatically a few minutes after
the compressor runtime.
5.5.4 Dim mode
For glazed door models you can set the dim mode of the light,
i.e. the intensity with which the light is to shine after the door
has closed.
Setting Dim mode
Note
u
With Dim mode on, the light dims out slowly when you close
the door.
There are 5 settings for the intensity of the light after the door is
closed. Settings range from having no light on in the wine
cooler, to minimum light intensity (1) up to maximum light inten-
sity (4).
u
Press menu.
u
Press the navigation arrow until Dim mode appears.
u
Press the Dim Mode symbol.
u
Press plus or minus.
w
The light intensity is shown in preview.
After selecting the lowest level, press the minus symbol again.
The button becomes inactive. The standby symbol is displayed
on the screen.
The plus symbol is greyed out when the highest level is
selected.
u
Press OK to confirm your settings.
w
The display switches to the home screen.
w
The light intensity after closing the door is set.
5.5.5 Labelling clip
You can write which wines are stored in the respective
compartments on the label clip. You can obtain additional label-
ling clips from your dealer.
Using labelling clips.
Fig. 50
Note
Do not use water-resistant permanent markers.
u
Label with a water-soluble film pen (non-permanent).
5.5.6 Wooden shelf
Fig. 51
To remove the wooden shelf:
u
Pull the wooden shelf forward.
u
Lift the wooden shelf.
To insert the wooden shelf:
u
Place the wooden shelf on the rails.
6 Maintenance
6.1 Change the FreshAir filter.
The FreshAir filter guarantees optimum air quality. It should be
changed every 12 months. When the timer is set a message on
the display prompts you to change it. The FreshAir filter can be
ordered from the specialist dealer.
Change FreshAir filter is displayed.
u
Press the change FreshAir filter symbol
w
The display switches to the home screen.
The message can be displayed again by pressing on the menu
field until the filter has been changed and confirmed. (see 8) .
Fig. 52
u
Remove cover.
Maintenance
* Depending on model and options 23
Loading ...
Loading ...
Loading ...