Loading ...
Loading ...
Loading ...
Fig. 25
u
Insert the cable mirror inverted.
w
The black mark must be positioned on the edge of the cable
holder.
u
Swing the cable holder in.
Fig. 26
u
Insert the bearing bush from the other side and click into
place.
Fig. 27
u
Release the cover and remove from the side.
Fig. 27 (1)
u
Rotate the cover 180° and clip onto the other side from the
right.
Fig. 27 (2)
u
Click the cover into place.
Fig. 27 (3)
u
Position the screw with a T25 screwdriver.
Fig. 27 (4)
u
Position the upper bearing bracket.
Fig. 27 (5)
w
Place the pins in the provided screw holes.
u
Tighten the screw.
Fig. 27 (4)
u
Insert the screw with a T25 screwdriver and tighten.
Fig. 27 (6)
4.3.7 Moving the central bearing parts to the
other side
Fig. 28
u
Remove the washer.
Fig. 28 (1)
u
Remove the screws with the T25 screwdriver.
Fig. 28 (2)
u
Remove the cover carefully.
Fig. 28 (3)
u
Screw the bearing bracket and the film rotated 180° firmly
onto the other side.
Fig. 28 (4)
u
Attach the cover rotated 180° onto the other side.
Fig. 28 (5)
u
Push the washer in from the front.
Fig. 28 (6)
4.3.8 Moving the lower bearing parts to the
other side
Fig. 29
u
Lift the bearing pin completely upward and remove.
Fig. 29 (1)
u
Remove the screws with the T25 screwdriver and remove
the soft stop connection.
Fig. 29 (2)
Putting into operation
12 * Depending on model and options
Loading ...
Loading ...
Loading ...