Loading ...
Loading ...
Loading ...
26
GPF475 Trim Kit
3/4" Custom Panels
•Remove the two screws below the access
panel. Retain screws.
•Loosen the two screws located between the
door and the access panel. Do not attempt
to remove these screws. They are secured to
the access panel with washers.
•Remove the access panel assembly and
toekick from the dishwasher. Set aside.
NOTE:
Do not remove the insulation behind the access panel
or toekick.
B. Place the metal door panel support on the
custom panel, with the projecting tabs
overlapping and against the bottom edge.
Center the support panel by matching the
center line to the triangle cutout.
NOTE:
Do not remove tape from adhesive strips.
A. Lay the custom panel on a flat surface with
appearance side down.
•Measure and mark the center line. Use a
carpenters square to draw the center line.
Step 2:
Remove Lower
Access Panel
Assembly
Step 3:
Mount Custom
Panel To Metal
Support Panel
Loosen 2 Screws
Escutcheon
Door
Panel
Access Panel
Toekick
Loosen 2 Screws
Escutcheon
Door
Panel
Access Panel
Toekick
Adhesive
Strips Both
Sides
Tab
Tabs
Overlap
Bottom
Edge
Metal Support
Overlaps
Top
Edge
Loading ...
Loading ...
Loading ...