Loading ...
Loading ...
Loading ...
23
GPF425 Series Trim Kit
1/4" Custom Panels
Step 3:
Install Door
Panel Trim
And Custom
Panel
Remove the protective plastic covering from
side trim pieces.
B. Slide “Z” shaped trim under the escutcheon.
A. Place bottom trim against the bottom of
the door panel and drive center screw,
then left and right screws.
C. Slide custom door panel under the “Z”
trim and bottom trim.
D.The notch on the side trim pieces go
towards the front. Slide side trim up and
under the escutcheon and over the edge
of the custom panel.
F. Center punch and drill holes through the
holes in the side trim and into the dish-
washer door.
•Secure the trim to the door with color
matched screws provided. Remove tape.
E. Use masking tape to hold trim tightly
against the custom panel.
“Z” Trim
Drill Holes and
Install Screws
Tape Trim
To Custom
Panel on
Each Side
Loading ...
Loading ...
Loading ...