Loading ...
Loading ...
Loading ...
223
The GP-1/GP-1A GPS unit (available separately) can be
connected to the camera’s accessory terminal (0 1) using the
cable supplied with the GP-1/GP-1A, allowing information on
the camera’s current position to be recorded when photographs
are taken. Turn the camera off before connecting the GP-1/
GP-1A; for more information, see the GP-1/GP-1A manual.
❚❚ Setup Menu Options
The Location data item in the setup menu contains the options
listed below.
• Position: The current latitude, longitude, altitude, and
Coordinated Universal Time (UTC).
• External GPS device options > Standby timer: Choose whether or not
the standby timer is enabled when a GPS unit is attached.
• External GPS device options > Set clock from satellite: Select Ye s to
synchronize the camera clock with the time reported by the
GPS device.
Location Data
Option Description
Enable
Standby timer enabled. The timer expires automatically if
no operations are performed for the period specified in
Custom Setting c2 (Standby timer, 0 263), reducing the
drain on the battery. If a GP-1 or GP-1A unit is connected,
the unit will remain active for a set period after the timer
expires; to allow the camera time to acquire location data,
the delay is extended by up to one minute after exposure
meters are activated or the camera is turned on.
Disable
Standby timer disabled, ensuring uninterrupted recording
of location data.
Loading ...
Loading ...
Loading ...