Loading ...
Loading ...
Loading ...
REMOVABLE OVEN RACKS
BUMPED-IN
RACK GUIDES
Be careful not to scratch the oven finish when
Installing or removing oven racks.
1"o install:
1. SSt the raised back edge of the rack on a pair of rack
guides.
2. Push the rack in until you reach the bump in the rack
guide, then lift the front of the rack and push the rack
all the way in.
Toremove:
1. Pull the oven rack out, then up.
NOTE:
The racks are designed with stop locks. When
the racks ere placed correctly on the rack sup-
port and extended from the oven, the stop lock
prevents the racks from tilting when you ere
removing food from the racks or placing food on
them.
REMOVABLE OVEN DOOR
STOP(BROIL) POSITION
/
HINGE
II
To remove:
1. Open the door to the stop position (see Illustretlon).
2. Grasp the door st each side and lift up and off the
hinges. DO NOT lift the door by the handle.
NOTE: When the door is removed and hinge arms
ere at stop position, do not bump or try to move
the hinge arms. The hinges could snap back
causing an injury to the hands or damage to the
porcelain on the front of the range. Cover the
hinges with toweling or empty towel rolls while
working In the oven area.
To replace:
1. Hold the door over the hinges with the slots at the
bottom edge of the door lined up with the hinges.
The hinge arms must still he in the stop
position.
2. Slide the door down onto the hinges as far as It wlU
go and close the door.
REMOVABLE STORAGE DRAWER
GUIDESTOP
This drawer gives you Space for keeping
cookware end hekeware. Plastics and flammable
materiel should not be kelpt in this drawer.
Do not overload the storage drawer. If the drawer is too
heavy, it may slip off the track when opened. To open the
drawer, grasp the center of the handle and pull straight
out.
To remove: Pull drawer straight out and lift over the
guide stops.
To replace: Lift over the guide stops and slide drawer
Into place.
17 NEMNT94
Loading ...
Loading ...
Loading ...