Loading ...
Loading ...
Loading ...
EN
32
Operation
www.bora.com
7 Operation
Observe all safety and warning information during
operation (see the Safety chapter).
INFO Only operate the cooktop if the stainless steel
grease filter and the air inlet nozzle have been
installed.
7.1 General operating instructions
The cooktop or cooktop extractor is operated using the
operating panel.
The selection of the cooking zone is performed by the
direct selection of the assigned sensor button on the
operating panel.
There are 9 power levels and one power setting available
for each cooking zone and the cooktop extractor.
The selection on the setting ring is performed by
direct selection or by uniformly swiping clockwise or
anti-clockwise.
0
3
1
6
9
P
Abb. 7.1 Setting ring with power level positions
7.2 Operating the cooktop
Switching on
INFO If the display shows
0
and no other input is
made, the device will switch off automatically
after 20 seconds.
Press the on/off switch to switch on the device.
The power level
0
is shown on the display.
Switching off
INFO Use the operating panel to switch off the
cooking zone after use. Do not rely on the pan
size recognition.
Press the on/off switch to switch off the device.
Pay attention to the residual heat display
(see the Device Description chapter).
7.2.1 Select cooking zone
Press the cooking zone button for the desired cooking
zone.
The
0
in the cooking zone indicator lights up more
brightly.
7.2.2 Adjusting the power level
Press the desired power level or
Press and uniformly swipe round the setting ring until
the desired power level is reached.
7.2.3 Changing the power level
Press the cooking zone button for the desired cooking
zone.
The cooking zone indicator lights up more brightly.
Select the desired power level.
7.2.4 Selecting the power setting
Press the cooking zone button for the desired cooking
zone.
The cooking zone indicator lights up more brightly.
Select power setting
P
.
The power setting
P
is displayed in the cooking zone
indicator.
7.2.5 Switching the power setting off early
Press the cooking zone button for the desired cooking
zone.
The cooking zone indicator lights up more brightly.
Select another power level.
The current power level is displayed in the cooking
zone indicator and the power setting is deselected.
7.2.6 Switching off the cooking zone
Press the cooking zone button for the desired cooking
zone.
The cooking zone indicator lights up more brightly.
Press the power level position
0
.
0
will appear on the display for a few seconds, then the
display will turn off.
7.2.7 Pay attention to the residual heat
display
After switching it off, the cooking zone remains hot.
H
is
displayed in the cooking zone indicator (residual heat
display). The cooking zone indicator will go out after
sufficient cooling time (temperature < 60°C).
Info While
H
is displayed in the cooking zone
indicator (residual heat display), do not touch
the cooking zone or place any heat-sensitive
objects on top of it. Risk of burns and fire!
Pay attention to the residual heat display.
Be careful not to touch or place objects on hot hobs.
Loading ...
Loading ...
Loading ...