Loading ...
Loading ...
Loading ...
EN
31
Installation
www.bora.com
Connect the contact plug [6] to the electronic unit [5].
Ensure that the protective hose [4] is located directly
on the contact plug [6] and that the protective hose [4]
goes through the opening [3] in the cover [2].
4
3
2
1
Abb. 6.44 Attaching tension relief
[1] Cover
[2] Cable opening
[3] Protective hose
[4] Cable tie
Attach the cable tie [4] to the cover [1].
However, do not yet tighten the cable tie.
Avoid tension on the cable.
Close the cover [1].
Tighten the cable tie [4] (tension relief).
Ensure that the cable is not caught or damaged and is
not able to touch any hot hobs.
Verify that the installation was done correctly.
Switch on the main switch/automatic circuit breaker.
Put the cooktop extractor into operation
(see the Operation chapter).
Check all the functions are working correctly.
6.10 Handover to user
Once installation is done:
Explain the important functions to the user.
Explain all safety-relevant aspects of operation and
handling to the user.
Provide the user with the accessories and operating
and installation instructions to be kept in a safe place.
Loading ...
Loading ...
Loading ...