Loading ...
Loading ...
Loading ...
23
PROBLEM CAUSE SOLUTION
After grinding, the ground coee in the
lter does not reach the “perfect dose”
The "Smart Tamping Station" needs
cleaning
Clean as described in section “8.5 Cleaning the
“Smart tamping station””, then grind again
The quantity of ground coee needs
adjusting
Adjust the quantity of coee with the dial
(B2). If the dial is already in the max. position,
select the second range of grinding adjust-
ment (see “6. Menù settings”- “Extra grinding
adjustment”). If the problem persists, replace
the burrs as described in section “8.4 Replac-
ing the burrs”
Over time the burrs wear down
Replace the burrs as described in section “8.4
Replacing the burrs”
Loading ...
Loading ...
Loading ...