Loading ...
Loading ...
Loading ...
12
LIGHTS EXPLANATION OF LIGHTS OPERATION
on
The bean container (A2) is not inserted
Insert bean container or check that is completely locked.
The container is correctly inserted when the arrow is
lined up with the symbol and you hear a “click”.
ashing
The ness of the grind regulation is in-
correct (or out of correct range)
Move the selector within the 8 levels from coarse to
ne, keeping in mind to:
• Always adjust the coee mill during the grinding
• Adjust one grinding level at a time and make at
least 5 coees before adjusting again
OUT of correct
range
Correct
range
on
Presser lever (A20) is not in the correct
position
Turn the lever back in place.
ashing
Pressing is needed The coee has just been ground and the lter holder
is attached to the coee mill
The portalter (C1) has been detached
from the coee mill without pressing
Detach the portalter and press the coee as de-
scribed in section “3.2 The perfect dose” “add the
preground coee in the lter”
The portalter has been detached be-
fore grinding has ended or pressing has
been performed too quickly
Repeat grinding
The slide of coee grinder is clogged Clean as described in section “8.5 Cleaning the
“Smart tamping station”” and section “11. Trouble-
shooting” in correspondence to the picture.
The burrs are blocked by foreign matter Remove the foreign matter and clean the burrs as de-
scribed in section “8.3 Cleaning the burr”.
on (red)
Descaling must be performed
Descale the appliance as described in section “10. Descaling”
ashing (red) +
ashing
(orange)
Descaling is underway Complete the operation as described in section “10.
Descaling”: the light comes white when the rinsing
cycle of descaling is underway
on (red) + on
(white)
The rinsing cycle of descaling must be
performed
…
→
Loading ...
Loading ...
Loading ...