Loading ...
Loading ...
Loading ...
31
The display sequence is the following:
1. First Touch Sw Version is displayed during 10s in timer displays. First, “Functional
Software Version” is displayed without any dots and any timer LEDs on. Second, “Safety
Software version” is displayed with dots and timer LEDs on.
2. Then a short beep is heard and First Induction Generator Sw version is displayed. First,
“Functional Software version” is displayed without any dots and any timer LEDs on. Second,
Safety Software version” is displayed with dots and timer LEDs on.
3. Then another short beep is heard and Second Induction Generator Sw version is displayed.
First, “Functional Software version” is displayed without any dots and any timer LEDs on.
Second, “Safety Software version” is displayed with dots and timer LEDs on.
4. Then another short beep, and the display sequence is finished.
5. If a key is pressed during the Sw Display Sequence, the sequence finished and touch control
continued at normal operation.
IV.2.n TIMER
The timer function consists in activating different timers that are assigned to individual
cooking zones. "00" is displayed in the digits reserved for the timer. When heater timer is
elapsed, the heater is switched off.
¾ Timer function is activated when “heater’s timer selection/ /Warm key” is pressed,
and the heater’s power level is greater than 0.
¾ Timer LED is blinking indicating that the zone is being timed
¾ With "+Timer" or "-Timer" keys, timer time can be chosen. A Beeps sounds.
¾ Pressing simultaneously timer "+/-" keys the timer is cancelled (goes to 00), but the
heater has to be selected.
¾ If timer "+" or "-" keys is maintained pressed during TBD time, there is quick setting
timer time.
¾ When setting timer time, it is possible to go from "00" to "99" with "-" key, and from
"99" to "00" with "+" key.
¾ Maximum time is 99 minutes.
Loading ...
Loading ...
Loading ...