Loading ...
Loading ...
Loading ...
19
After installing the induction hob as paragraph III.2.a INDUCTION HOB INSTALLATION, align
the suction unit with the hob (Fig. 3.2.c.1) by positioning it inside the cut of the base of the
piece of furniture previously made (Fig. 3.2.b.1).
If the length of the metal pipe is not enough to reach the upper housing it can be increased
moving the pipe inside the motor box.
In order to do that it is needed to detach the front panel loosing the four screws without
completely remove the panel. (Fig.3.2.c.2)
Fig. 3.2.c.1
Fig. 3.2.c.2
Loading ...
Loading ...
Loading ...