Loading ...
Loading ...
Loading ...
16
· It is necessary to ensure adequate ventilation on the front side of the base so that the air can
properly flow (Fig. 3.2.a.4).
· If a drawer is below the hob, to guarantee a good air circulation and good cooling system
of the induction hob, maintain a gap of 30 mm minimum between the ventilation of the lower
part of the hob and what is stowed inside the drawer (Fig. 3.2.a.4).
· If a drawer is placed under the work, avoid to put into this drawer flammable objects
(for example: sprays) or not heat-resistant objects.
· Materials which are often used to make worktops expand on contact with water. To protect
the cut-out edge, apply a coat of varnish or special sealant. Particular care must be given to
applying the adhesive joint supplied with the hob to prevent any leakage into the supporting
furniture. This gasket guaranties a correct seal when used in conjunction with smooth work
top surfaces.
· After installation, the connecting cable must not be subjected to any mechanical stress, for
example, because of a drawer.
· WARNING: Use only hob guards designed by the manufacturer of the cooking appliance
or indicated by the manufacturer of the appliance in the instructions for use as suitable or
hob guards incorporated in the appliance. The use of inappropriate guards can cause
accidents.
Fig. 3.2.a.4
Loading ...
Loading ...
Loading ...