Loading ...
Loading ...
Loading ...
23
Aspirator connection procedure:
First of all, connect the motor box to the induction hob:
• Connect the flat connector (male-female) to the mainboard, with the control’s
connector dropping from the induction hob (Fig. 3.3.3).
· Protection against the parts under tension must be ensured after the building-in.
· The hob connection to the main must be made using an earthed plug or via an omnipolar
circuit breaking device with a contact opening of at least 3 mm.
· The power cord shall be positioned so as not to touch the hot parts of the hob or any other
part.
We cannot be held responsible for any incident resulting from incorrect connection
or which could arise from the use of an appliance which has not been earthed or has
been equipped with a faulty earth connection.
Fig. 3.3.3
Loading ...
Loading ...
Loading ...