Loading ...
Loading ...
Loading ...
30
¾ The respective cooking zone display shows the symbol "A" for automatic heat-up
indication.
¾ If the heat-up boost is realized on a cooking zones with activated pan detection and
no pan is detected, an “A" will blink in alteration with the symbol for "no pan".
¾ If a higher cooking stage is selected with the slider, the heat-up function remains
active with the new cooking stage.
¾ When a lower cooking stage is selected any time during the automatic heat-up, heat-
up function will be deactivated.
¾ If the cooking zone is switched off during active heat-up function, the heat-up is also
deactivated.
¾ When the heat-up time has passed as planned, or the automatic heat-up is deactivated
by the above-mentioned operating steps, the bargraph shows the set cooking stage.
The “A” is deactivated.
IV.2.l SECURITY
Something (an object or a liquid) is pressing any key during more than 10s. 2 Short Beep + 1
Long beep every 30s while the key is pressed. Cook-top will turn Off. This symbol will
maintain blinking while the issue persists.
IV.2.m SOFTWARE VERSION VISUALIZATION
SW version only can be activated always when cook-top is off and only during the first 30
seconds after power up the cooktop:
1. Unplug and Plug the cooktop, and press the sequence (only during the first 30 seconds
after power up the cooktop).
2. First press “- timer”, (Step 1)
3. Without removing “- timer”, ‘then press “+ timer” key simultaneously. (Step2)
4. Without removing the finger of ‘- timer’, touch simultaneously ‘Front heater selection’
key (Step 3).
Loading ...
Loading ...
Loading ...