Loading ...
Loading ...
Loading ...
29
To set the power level of the bridge heater press any key of each sliders. Bridge heater power
level is shown in bar graphs.
When the heaters are operated as one bridge heater, the selectable power levels are from 1
to 9, it is not possible to select booster power level. When the heaters are operated
individually, the selectable power levels are from 1 to P.
When the heaters are operated as bridge heater and want to switch off to zero power level,
the user must to press on the lowest part of the heater’s slider, a beep is heard, and heater
is OFF.
IV.2.i HEAT-UP FUNCTION
User activates the “heat-up” function by pressing for more than 3 second over the slider
when cooking zone is working a power level bigger than zero and it has been selected. It is
not possible to activate Heat-up function when the heater is working at warm, 9 or P power
level.
When Heat-up is activated, the heater operates on the highest power setting (level P) for
the duration of the heat-up time. After the heat-up time expired, the cooking zones
automatically return to the cooking stage set by the operator previously to the heat-up
selection.
The heat-up time is depending on the level of the set cooking stage.
The sequence is the following:
¾ Cooking zone must be at level different of 0, Warm, 9 or P on display.
¾ Then press for more than 3 second over the slider when cooking zone is working a
power level bigger than zero
Cooking level
0
1
2
3
4
5
6
7
8
Heat-up time (s) 0 40 70 120 180 260 430 120 195
Loading ...
Loading ...
Loading ...