Loading ...
Loading ...
Loading ...
15
How to stick the gasket:
The gasket supplied with the hob avoids all infiltration of liquids in the cabinet.
His installation has to be done carefully, in conformity of the following drawing.
Stick the gasket (2) two millimeters
from the external edge of the glass,
after removing the protection sheet (3).
Fitting - installing:
· Ensure that there is a distance of 50 mm between the hob and the wall or sides.
· Ideally the hob should be installed with plenty of space on either side. There may be a wall
at the rear and tall units or a wall at one side. On the other side, however, no unit or divider
must stand higher than the hob.
· The piece of furniture or the support in which the hob is to be fitted, as well as the edges
of furniture, the laminate coatings and the glue used to fix them, must be able to resist
temperatures of up to 100 °C.
· The mural rods of edge must be heat-resisting.
· Not to install the hob to the top of a not ventilated oven or a dishwasher.
Place the hob on (Fig. 3.2.a.3)
Fig. 3.2.a.3
Loading ...
Loading ...
Loading ...