Loading ...
Loading ...
Loading ...
REPLACING BAI"rERY
_CAUTION: Do notshortbattery
terminalsby allowinga wrench or any
other objecttocontact bothterminalsat
the same time. Before connectk',gbattery,
remove metal bracelets, wristwatch
bands, rings,etc.
Positive terminal must be connected first
to prevent sparking from accidental
grounding.
1. Lift seat pan to raised position and
open battery box door.
2. DisconnectBLACK battery cable first
then RED battery cab)e and carefully
remove battery from tractor.
3. installnew battery with terminalsin
same positionas old battery.
4. First connect RED batterycable to
positive (+) terminal with hex bolt and
keps nut as shown. Tighten securely.
5. Connect BLACK groundingcable to
negative (-) terminal with remaining
hex bolt and keps nut. Tighten
securely.
6. Close battery box door.
Battery
Boxl
INTERLOCKS AND RELAYS
Looseor damaged wiringmay causeyour
tractorto runpoody,stoprunning, or
preventit from starting.
,, Check wiring. See electricalwiring
diagram in the Repair Parts section.
TO REPLACE FUSE
Replace with 15 amp automotive-type
plug-infuse. The fuse holderis legated
behind the dash.
TO REMOVE HOOD AND GRILL
ASSEMBLY
1. Raise hood.
2. Unsnap headlight wire connector.
3. Stand in front of tractor. Grasp hood
at sides, tilttoward engine and liftoff
oftractor,
4. To replace, reverse above procedure.
\
HeadlightWire
Connector
Hex B_t
Positive Negative
(Red) Cable (Black) Cable
TO REPLACE HEADLIGHT BULB
1. Raise hood,
2. Pull bulb holderout of the hale in the
backside of the grill.
3. Replace bulb in holder and push
bulb holdersecurely back into the
hole in the backside of the grill.
4. Close hood.
ENGINE
Maintenance, repair, or replacementof
the emissioncontrol devicesand
systems, whichare being done at the
customersexpense, may be performed
by any non-wad engine repair establish-
ment or individual Warranty repairsmust
be performed by an authorizedengine
manufacturer's service outlet,
TO ADJUST THROTTLE CONTROL
CABLE
The throttlecontrolhasbeenpresetatthe
factoryand adjustmentshouldnotbe
necessaly.Checkadjustmentas described
belowbefore leoseningcable. Ifadjustment
isnecessary,proceedas folbws:
1. Withenginenotrunning,movethmttfa
controlleverfrom slowtochokepe_len.
Slowlymove leverfrom choketofast
position.
25
Loading ...
Loading ...
Loading ...