Loading ...
Loading ...
Loading ...
TO ADJUST STEERING WHEEL
ALIGNMENT
tf staef_ngwhee_crossbarsare not
hor{zoofal(leftto dght)when wheels are
positionedstraight forward, remove
steering wheel and reassemble per
instructions in the Assembly sectionof
this manual.
FRONT WHEELTOE-IWCAMBER
The front wheel toe-in and camber-are
notad ustabJeon yourtractor, ff damage
has occurred toaffect the rent wheel
toe-in or camber,contact your nearest
authorized service center/department.
TO REMOVE WHEEL FOR REPAIRS
1. Block up axle securely.
2. Remove axle cover, retaining ring
and washers to allow wheel removal
(rear wheel contains a square key *
Do not lose).
3. Repair tire and reassemble.
NOTE: On rear wheels only: align
groovesin rear wheel hub and axle.
insertsquare key.
4. Replace washers and snap retaining
ring securelyin axle groove.
5. Replace axle cover.
NOTE: Toseal tirepuncturesand
prevent flat tires due te slew leaks, tire
sealant may be purchased fromyour
localpads dealer.Tire sealantalso
prevents tire dry rot and corrosion.
Washers
Retaining_
Axle
,_uare Key_
(Rear Wheel Only)
TOSTARTENGINEWITHAWEAK
BATTERY
,_C,_.UTION: Le,_d-_id batteriesgenerate
explosivegases. _,eepsparks,_ and
smokingmaterialsawayfrombatteries.
Alwayswear eyeprotectionwhenaround
batteries.
if yourbatteryistOoweak tostarttheengine,
it shouldbe rachel'gad.(See"BATTERY"in
the MAINTENANCEsectionof thismar,u_l).
If "lumpercables"are usedforemerger_/
starting,renewthisprocedure:
IMPORTANT:Yourtrsctoris equippedwitha
12vdt negative groundedsystem.Theother
vehk:almustalso be a 12 vcit ne_
grounded system.Do not useyourtractor
batterytostartother vehP..els.
TOATFACHJUMPER CABLES-
1. Connect each end of the RED cable
to the POSITIVE (+) terminaloteach
battery,taking care notto short
against chassis.
2, Cent'.actone end of the SLACK cable
tothe NEGATIVE (-) terminalof fully
charged battery.
3, Connect the other endof the SLACK
cableto good CHASSIS GROUND,
away fromfuel tank andbattery.
TO REMOVE CABLES,REVERSEORDER
1. BLACK cable firstfrom chassisand
then from the fully charged battery.
2. RED cable test fromboth batteries.
PositiveTerminal Negative Terminal
Terminal
24
Loading ...
Loading ...
Loading ...