Loading ...
Loading ...
Loading ...
en Troubleshooting
30
2.
Insert the intermediate pane into the retainer ⁠ at
the bottom ⁠ and push it in firmly at the top.
3.
Push the left- and right-hand retainer ⁠ downwards
until the intermediate pane is clamped ⁠.
4.
Attach the front pane downwards into the left- and
right-hand retainers ⁠ ⁠.
5.
Push the front pane to the appliance until the left-
and right-hand hook ⁠ is opposite the support ⁠ ⁠.
6.
Push the front pane in at the bottom ⁠ until you
hear it click into place.
7.
Open the appliance door slightly and remove the
tea towel.
8.
Screw both screws back in on the left and right of
the appliance door.
9.
Put the door cover in position and push down on it
⁠ until you hear it click into place.
10.
Close the appliance door.
Note:Do not use the cooking compartment again until
the door panes have been correctly fitted.
21  Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
If the appliance is defective, call Customer Service.
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
Only use genuine spare parts when repairing the
appliance.
If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
21.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working.
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
Electronics fault
1.
Briefly disconnect the appliance from the power supply by switching off the fuse.
2.
Reset the basic settings to the factory settings.
→"Basic settings", Page23
Loading ...
Loading ...
Loading ...