Loading ...
Loading ...
Loading ...
Microwave en
17
Drying the cooking compartment with the Dry
function
The "Dry" function heats up the cooking compartment
so that the moisture in the cooking compartment evap-
orates. You will then need to open the appliance door
to allow the steam to escape.
WARNING‒Risk of burns!
The appliance becomes hot during operation.
Allow the appliance to cool down before cleaning.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120°C, this will damage the enamel.
Do not use the appliance if there is water on the
cooking compartment floor.
Wipe away any water on the cooking compartment
floor before operation.
Requirement:The cooking compartment must have
cooled down.
1.
Remove any food remnants from the cooking com-
partment.
2.
Dry the cooking compartment with a sponge.
3.
Press ⁠ to switch the appliance on.
4.
Press ⁠.
5.
Swipe left or right to select "Dry" ⁠.
6.
Press the bottom row.
a The duration will appear on the display. The duration
cannot be changed.
7.
Press the bottom row.
8.
Press ⁠ to start drying the appliance.
a Once the duration has elapsed, an audible signal
will sound and the appliance will stop heating.
9.
Press ⁠ to switch the appliance off.
10.
Remove limescale marks with a cloth soaked in vin-
egar, then wipe with clean water and dry with a soft
cloth.
11.
Leave the appliance door open for 1-2minutes so
that the cooking compartment dries completely.
9.3 Microwave combination
To reduce the cooking time, you can use certain types
of heating in combination with the microwave.
Possible types of heating include:
¡ Hot air ⁠
¡ Top/bottom heating ⁠
¡ Circo-roasting ⁠
¡ Grill, large area ⁠
¡ Grill, small area ⁠
Possible microwave power settings include:
¡ 90watts
¡ 180watts
¡ 360watts
Setting the microwave combination
Note:
Note the correct way to operate the microwave:
¡ →"Safety", Page2
¡ →"Preventing material damage", Page7
¡ →"Microwave power settings", Page11
¡ →"Cookware and accessories with microwave",
Page15
1.
Use ⁠ to switch the appliance on.
2.
Press ⁠.
3.
Swipe left or right to set the "microwave
combination" ⁠.
4.
Press "Next".
5.
To select the type of heating, press "Type of heat-
ing".
6.
Swipe left or right to select a type of heating.
7.
To select a temperature, press "Temperature".
8.
Swipe left or right to select a temperature.
9.
To select the microwave power setting, press "Mi-
crowave power setting".
10.
Swipe left or right to select a microwave power set-
ting.
11.
To select the cooking time, press "Cooking time".
12.
Swipe left or right to select a cooking time.
13.
Press ⁠ to save the settings.
14.
Use ⁠ to start the microwave combination.
a The microwave combination starts and the cooking
time counts down. The heat-up bar lights up.
a Once the cooking time has elapsed, an audible sig-
nal sounds and the appliance stops heating.
15.
Press any button to end the signal tone.
If necessary, set another microwave combination.
When the food is ready, use ⁠ to switch the ap-
pliance off.
Note:If you open the appliance door during operation,
the operation stops. When you close the appliance
door, you must press ⁠ to continue the operation. If
you have changed the basic setting for this, make sure
that the microwave does not resume operation without
food inside.
→"Basic settings", Page23
Changing the temperature
You can also change the temperature while operation
is in progress with the microwave combination.
1.
Press the temperature.
2.
Swipe left or right until the changed temperature ap-
pears in the middle.
a The temperature is changed.
Changing the cooking time
1.
Press ⁠.
2.
Swipe left or right to change the cooking time.
a The setting is applied.
Changing the microwave combination
If you change the combination of the type of heating
and the microwave power setting, all other settings are
reset.
1.
Press ⁠ to pause operation.
2.
Press "Type of heating" or "Microwave power set-
ting".
3.
Swipe left or right to select the type of heating or the
microwave power setting.
4.
To select a temperature, press "Temperature".
5.
Swipe left or right to select a temperature.
6.
To select the cooking time, press "Cooking time".
7.
Swipe left or right to select a cooking time.
8.
Press ⁠ to save the settings.
9.
Use ⁠ to start the microwave combination.
Loading ...
Loading ...
Loading ...