Loading ...
Loading ...
Loading ...
CY#LEcontinued
t. For best results, follow the steps in
BEFORE A CLEAH CYCLE.
2. Slide the handle to the right.
Turn the oven control knob to the off position.,
You will need to wait for the oven temperature
to drop below the lock temperature (approx_ 1
hour) before attempting to open the door,. The
indicator light will not blink if the cycle is
interrupted,
3, Turn the oven control knob to 'CLEAN"
The "LOCK DOOR'S-and "OVEN ON"
indicator lights will glow.
If you tum the oven control knob to CLEAN
and forget to lock the door, the "LGCK
DGGR" indicator light will flash, alerting
you to lock the door.
4, The clean cycle lasts 4 hours and 20
minute& The "OVEN OH" and "LOCK
DOOR" indicator lights will blink at the end
of the clean cycle The oven door cannot
be unlocked until the temperature has
cooled and the door handle slides easily to
the left,
5. After the cycle is finished, turn the oven
control knob to the off position and unlock
the door,
After the cycle, you may
notice some white ash in
the oven.. Just wipe it up
with a damp cloth or
sponge.
If white spots remain, scrub them with a
soap-filled steel wool pad, Be sure to rinse
thoroughly These are usually deposits of salt
that cannot be removed during the cycle
_f fer any re.son you are mot satisfied
wit[, the cHean_ng results, just repea_
_he cycBe.
18
Loading ...
Loading ...
Loading ...